Apologies for the delay in getting this out but weather has been atrocious and playing havoc with the broadband around here, but here it is. Part 3 of the invaluable tips from the legendary Jack Moorhouse which will have you shaving shots from your handicap in no time.
Without further ado here we go.
Ever wonder what’s the toughest shot in golf? Candidates abound. There’s the restricted swing, the controlled fade, and the feet inside/ball outside fairway bunker shot, as well as the ball in the rough on an upslope, the double breaking putt, and the traditional flop shot. Truth is, every one has his or her own set of tough shots. You may have covered them in golf lessons or read about them in golf tips, but you still can’t hit them. They intimidate you and add strokes to your golf handicap. Below are my candidates for the five toughest shots in golf. See if you agree.
Some players consider driver off the deck the toughest shot in golf. Many golfers never use this shot. The just read about it in golf tips. But in the right situation, it can help. The problem is your driver has the least amount of loft, so it’s hard getting the ball in the air. If you hit up on the ball, you’ll probably mis-hit. The only way to get the ball in the air is to cut the shot. Play the ball off your front heel and aim 15 yards left of your target (right for left-handers). Then swing across the ball, instead of down on it. Feel like you’re pulling your right hand toward you’re left hip on the way down.
The Plugged Bunker Lie
Other players consider the plugged bunker lie the toughest shot in golf. It’s certainly a candidate. Since you’re ball is buried in the sand, you can’t hit the typical sand blast you learned in golf lessons. There’s too much sand. Instead, come down hard into the impact zone. You should feel like you’re jamming the heel of the club into the bunker with the toe pointed at the sky. If you keep your hands low to the ground through impact, you’ll create an explosion big enough to unplug the ball and escape the bunker.
Then there’s the severe downslope from the rough. The hill’s slope moves the bottom of your swing arc back, making it easy to catch the ball fat or thin. The rough compounds any errors you make. Set your body level with the lie by tilting your torso to the left (right for left-handers) until your front shoulder sits lower than your back shoulder. Now swing. Don’t hang back to fight the pull of gravity. Doing that moves your swing arc back even farther and makes missing the ball a real possibility. This shot isn’t always addressed in golf instruction sessions, but it’s so tough maybe it should be.
One of Two Bunker Shots
For my money, the toughest shot in golf comes down to one of two shots. The bunker blast from a downhill lie is one. You have to hit the ball high to get it out of the bunker, which is difficult because the slope negates the club’s loft. The secret to hitting this shot is to take a wider stance than normal for balance and then align your shoulders with the slope. Now open your clubface and make your normal bunker swing. Don’t try to swing too hard or get under the ball too much. The ball will come out lower and with extra roll.
My other candidate for the toughest shot in golf is the feet outside, ball inside bunker shot. This is one tough shot, not only for weekend golfers but also for pro players. Almost anything can happen. Spread your feet wider than shoulder width and position the ball just inside your front foot. Also, bend your knees and rear end down more, so you can get down to the ball. Hinge your wrists quickly when you swing and keep your body quiet for balance. The steeper the slope the more the ball will go right (left for left-handers).
What matters here isn’t which shot is the toughest, but how you handle a tough shot. Don’t let it intimidate you. When it does, you tense up and forget the keys to hitting the shot correctly. Next time you face a tough shot, relax. Run through the keys you learned in golf lessons or read about in golf tips, and then swing away. And remember, you don’t always have to put the ball a foot from the cup. Be realistic with your expectations. You’ll conquer more tough shots that way and knock strokes off your golf handicap in the process.
Now there is one more part to this snippet of Jack's amazing info and I heighly recommend just even checking out his site here. What harm can it do? If you need help with your swing you can do a lot worse than visiting Jack Moorhouse's guide on How to Break 80.
Showing posts with label golf swing help. Show all posts
Showing posts with label golf swing help. Show all posts
Thursday, 25 February 2010
Sunday, 21 February 2010
Lower Your Score Using These Simple Techniques - Part 2
Coming on Monday 22nd Feb. Don't miss this as it will contain info on how to get the system I used to get my handicap down.
Alternatively you cant go straight there the now by clicking here.
Alternatively you cant go straight there the now by clicking here.
Saturday, 20 February 2010
Lower Your Score Using These Simple Techniques - Part 1
Here are a few tips I have learned using the amazing "How to Break 80" system. I obviously cant divulge them all but enjoy nonetheless. If you like what you read then visit here.
All golfers want to improve. Those serious about doing so take golf lessons from professionals or study golf tips offered in books, magazines, and newsletters, like mine. Usually, the golf lessons and golf tips focus on swing flaws. Refining your swing to eliminate flaws is a great way to improve ballstriking. Understanding how club design dictates the quality of impact is also a great way to improve ballstriking. In fact, it may be just as good, if not better than, working at eliminating swing flaws.
When we discuss club design, we usually talk clubhead size or shaft materials. These can affect your ballstriking and shot distance. But here we want to discuss a different aspect of club design. A club has three key design features:
* shaft lean toward target,
* significant lie (or shaft lean toward body),
* center of gravity
These features exist in every club, even your putter. They contain secrets on how to swing your drivers, wedges, and irons to improve your ballstriking, if we interpret them correctly. In other words, if we look at the features closely, we'll see how they dictate proper golf swing mechanics.
Shaft Lean Toward Target
Shaft lean is the first, and possibly the most important, club design feature to consider. If you sole a club properly in your normal address position, you'll see that the club sits on an angle where the handle leans slightly toward the target. The angle is important. It represents the angle at which the club must be delivered to the ball at impact to create optimal pressure. This pressure compresses a ball to a portion of its original size when hit, just like a racquet does with a tennis ball does when it's hit or a wall does when rubber is thrown against it.
Effective ball compression causes the ball to spring off a clubface at maximum velocity. The only way to effectively compress the golf ball-and produce crisp, clean shots-is to deliver a forward leaning shaft at impact, whether you're swinging a driver, iron, or wedge. This leads to maximum distance. A backward leaning shaft, on the other hand, doesn't achieve maximum distance because it lacks the pressure needed to compress the ball enough to maximize impact.
Using A Backward Leaning Shaft
Most golfers present a backward leaning shaft at impact, where the club's handle leans away from the target instead of toward it. A backward leaning shaft reduces the compression being delivered to the ball, leading to poor contact, poor direction, and a serious loss of distance. But you can learn to deliver a forward-leaning shaft with few simple chipping and pitching drills:
Begin by using a sand wedge. Place the ball well back in your stance to play a chip shot. The shaft should lean forward so that the handle is positioned in front of the clubhead, with your hands in front of your left pant pleat. Using your arms and shoulders only, swing the club back and through. Make sure you lead the handle of the club through the impact area. Hold the finish. The shaft should line up with your left arm and the ball should pop in the air. You've just hit a chip.
Next, widen your stance. Place the ball in the center of your feet. Make the same swing as before, but add some wrist hinge on your backswing. This will carry the ball a little further. Make sure to lead with the handle through impact as before. Continue to the same follow through position as the chip. You've just hit a pitch and run.
Keep Impact Attitude in Mind
Finally, hit some shots with your full swing, while keeping the same "impact attitude" in mind, as you have for the previous shots. You should notice a big difference in the quality of contact you get from this swing.
Forward-shaft lean is one of three key club design features. These features point the way to efficient swings when examined closely. Forward-shaft lean encourages you to swing the ball with a forward-leaning shaft at impact just like you're taught in golf instruction sessions and like how the clubmakers designed the club to be swung. If you want improved ballstriking, you must strike the ball with the impact attitude designed into the club. If you do, you'll hit longer, straighter shots that will help take strokes off your golf handicap.
End of Part One - Sponsored by my Good Friend Jack Moorhouse
Visit his page here and drop your score today
All golfers want to improve. Those serious about doing so take golf lessons from professionals or study golf tips offered in books, magazines, and newsletters, like mine. Usually, the golf lessons and golf tips focus on swing flaws. Refining your swing to eliminate flaws is a great way to improve ballstriking. Understanding how club design dictates the quality of impact is also a great way to improve ballstriking. In fact, it may be just as good, if not better than, working at eliminating swing flaws.
When we discuss club design, we usually talk clubhead size or shaft materials. These can affect your ballstriking and shot distance. But here we want to discuss a different aspect of club design. A club has three key design features:
* shaft lean toward target,
* significant lie (or shaft lean toward body),
* center of gravity
These features exist in every club, even your putter. They contain secrets on how to swing your drivers, wedges, and irons to improve your ballstriking, if we interpret them correctly. In other words, if we look at the features closely, we'll see how they dictate proper golf swing mechanics.
Shaft Lean Toward Target
Shaft lean is the first, and possibly the most important, club design feature to consider. If you sole a club properly in your normal address position, you'll see that the club sits on an angle where the handle leans slightly toward the target. The angle is important. It represents the angle at which the club must be delivered to the ball at impact to create optimal pressure. This pressure compresses a ball to a portion of its original size when hit, just like a racquet does with a tennis ball does when it's hit or a wall does when rubber is thrown against it.
Effective ball compression causes the ball to spring off a clubface at maximum velocity. The only way to effectively compress the golf ball-and produce crisp, clean shots-is to deliver a forward leaning shaft at impact, whether you're swinging a driver, iron, or wedge. This leads to maximum distance. A backward leaning shaft, on the other hand, doesn't achieve maximum distance because it lacks the pressure needed to compress the ball enough to maximize impact.
Using A Backward Leaning Shaft
Most golfers present a backward leaning shaft at impact, where the club's handle leans away from the target instead of toward it. A backward leaning shaft reduces the compression being delivered to the ball, leading to poor contact, poor direction, and a serious loss of distance. But you can learn to deliver a forward-leaning shaft with few simple chipping and pitching drills:
Begin by using a sand wedge. Place the ball well back in your stance to play a chip shot. The shaft should lean forward so that the handle is positioned in front of the clubhead, with your hands in front of your left pant pleat. Using your arms and shoulders only, swing the club back and through. Make sure you lead the handle of the club through the impact area. Hold the finish. The shaft should line up with your left arm and the ball should pop in the air. You've just hit a chip.
Next, widen your stance. Place the ball in the center of your feet. Make the same swing as before, but add some wrist hinge on your backswing. This will carry the ball a little further. Make sure to lead with the handle through impact as before. Continue to the same follow through position as the chip. You've just hit a pitch and run.
Keep Impact Attitude in Mind
Finally, hit some shots with your full swing, while keeping the same "impact attitude" in mind, as you have for the previous shots. You should notice a big difference in the quality of contact you get from this swing.
Forward-shaft lean is one of three key club design features. These features point the way to efficient swings when examined closely. Forward-shaft lean encourages you to swing the ball with a forward-leaning shaft at impact just like you're taught in golf instruction sessions and like how the clubmakers designed the club to be swung. If you want improved ballstriking, you must strike the ball with the impact attitude designed into the club. If you do, you'll hit longer, straighter shots that will help take strokes off your golf handicap.
End of Part One - Sponsored by my Good Friend Jack Moorhouse
Visit his page here and drop your score today
Subscribe to:
Posts (Atom)